Estes Wizard Bulk Pack
No tricks here and no magical wand needed for this Wizard! This magician is an easy-to-make Skill Level Beginner rocket that has wood fins to sand and glue onto the body tube. There's no engine mount to assemble because the engine is friction fitted snugly into the body tube. This model also requires simple painting.
You can use a wide variety of Estes standard engines to launch the Wizard. No illusions here with this rocket's top flights because it uses a bright orange streamer for tracking and recovery. Launch it to the stratosphere with the Electron Beam Controller and the Porta-Pad II Launch Pad. No doubt about it, this sorcerer will cast a spell in every classroom and at every launch field.
ATTENTION: Estes products may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.For more information go to www.P65Warnings.ca.gov/wood.
Please Note: In order to launch the Estes Wizard Bulk Pack you will need to purchase the following items:
Please Note: In order to build the Estes Wizard Bulk Pack you will need the following items (not included):
- Fine Sandpaper
- Carpenter's Glue
- Plastic Cement
- Hobby Knife
- Masking Tape
- Clear Tape
- Primer (white)
- Paint (blue)
Projected Max Altitude: 1600 ft (488m)
Recovery System: 18 in (45.7 cm) Streamer
Length: 12 in (30.5 cm)
Diameter: .74 in (19 mm)
Estimated Weight: 0.5 oz (14.2 g)
Estimated Assembly Time: 1 Hour (painting an glue drying time not included)
Fin Materials: Laser cut wood
Decal Type: Self-stick
Launch Rod Size: 1/8"