MakerBot PLA Filament Technical Specifications

MakerBot PLA Technical Specifications


TECH SPECS Imperial Metric
Heat Deflection (ASTM 648, 66 psi) 125-120°F 52-49°C
Flexural Modulus (ASTM D790, 15 mm/min) 377,000 psi 2,600 MPa
Tensile Strength at yield (ASTM D638, 50 mm/min) 8,990 psi 62 MPa
Tensile Modulus (ASTM D638, 50 mm/min) 522,000 psi 3,600 MPa
Strain at Yield - Elongation (%) >4.4% >4.4%
Notched Impact Strength (ASTM D256) 0.6 ft-lb/in 32 J/m

Specifications based on data provided by the material supplier.   Actual printed part specs may vary based on part geometry and print parameters selected.