Ultimaker 2+ Maintenance Kit

---

The Ultimaker 2+ Maintenance Kit contains the most commonly used replacement parts for the Ultimaker 2+ or Ultimaker 2 Extended+. It can be purchased in addition to your Ultimaker and used as an overall maintenance kit, or it can be used for spare parts.

This Maintenance Kit includes the following components:

 

• 1x Glass plate
• 1x Bowden tube
• 1x PT100 B sensor
• 1x Heater cartridge
• 1x Magnalube
• 1x Machine oil
• 1x Calibration card
• 2x Build plate clamp
• 2x Clamp clip
• 2x Tube coupling collet
• 1x Hot end isolator
• 4x Olsson nozzles (0.40, 0.25, 0.60 and 0.80 mm)
• 2x TFM isolator coupler
• 1x Print head alignment aid
• 1x Hot-end cooling fan
• 2x Print cooling fan

 

 

---

To keep your Ultimaker 2+ in optimal condition, Ultimaker recommends the following maintenance schedule, based on 1,500 printing hours per year:

 

• Every Month - Clean printer and lubricate axles.
• Every 3 Months - Check for play on axles, check tension of short belts, lubricate lead screw Z motor, and re-tighten hot end isolator.
• Every Year - Clean feeder and replace bowden tube.

Note: If the usage frequency is higher, please increase the frequency of maintenance on your machine to maintain optimal printing results.

 

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.