Bambu Lab A1 mini 3D Printer
Highlights:
Features:
- Full-auto Calibration.
- 4-Color Printing with AMS lite.
- Under 48 dB Low Noise in Silent Mode.
- Full-metal Linear Rails and Bearings.
- Vibration and Flow Rate Compensation.
Multi-Color Printing
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality (High-Speed Precision)
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
What's Included:
A1 mini Base Printer
- (1) A1 mini
- (1) Spool Holder
- (1) Purge Wiper
- (1) Build Plate
- (1) PTFE Tube
- (1) Bambu Filament Sample - 20g (Random Color)
- (1) Stainless Steel Nozzle (Included)
- (1) Accessory Box
A1 mini Combo Printer includes all of the above plus:
- (1) AMS lite Stand
- (1) AMS lite Body
- (4) AMS lite Rotary Spool Holder
- (3) PTFE Tubes
Technical Specifications:
| Item | A1 mini Specification | |
| Body | Build Volume(W*D*H) | 180*180*180 mm³ |
| Toolhead | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm |
|
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate |
| Max Build Plate Temperature | 80°C | |
| Speed | Max Speed of Tool Head | 500mm/s |
| Max Acceleration of Tool Head | 10000mm/s² | |
| Supported Filament | PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer |
Not Recommended | |
| Sensors | Monitoring Camera | Low Framerate Camera (Up to 1080P) Timelapse Supported |
| Filament Run Out Sensor | Yes | |
| Filament Odometry | Yes | |
| Power Loss Recover | Yes | |
| Filament Tangle Sensor | Yes | |
| Physical Dimensions | A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg |
|
Special Notes or Considerations:
PLEASE NOTE: Bambu Lab products are manufactured overseas and shipped to the STEMfinity warehouse here in the US. lead times may vary depending on current inventory levels.
You may also like
More from 11-13 Years
Recently viewed
