Call Us: (800) 985-STEM "7836"
Hours: M-F 8 AM to 5 PM (MST) 
SHOPPING CART

No Products in the Cart

TOTAL:
$0.00
Dremel 3D20 Idea Builder 3D Printer - STEMfinity
  • SKU: DRM-3D20-01

Dremel 3D20 Idea Builder 3D Printer

$679.00

Dremel 3D20 Idea Builder 3D Printer


Includes

  • 1 - Idea Builder 3D20 Printer
  • 1 - SD Card
  • 1 - PLA Filament Spool
  • 2 - Sheets Build Tape
  • 1 - 1-year Non-Commercial OR 60-Day Commercial Warranty
  • 1 - Unclog Tool
  • 1 - Object Removal Tool
  • 1 - Power Supply Cord
  • 1 - USB Connection Cable
  • 1 - User Manual and Quick Start Guide

 

Key Benefits

  • Safe and Quiet: Fully Enclosed Workspace
  • Precise: 100 Micron Build Resolution
  • Flexible: Removable Build Platform
  • Supported: by a One-Year Limited Warranty
  • Easy to Use: Onboard Software and Touchscreen

 

Feature Overview
  • Advanced motion control minimizes noise
  • Removable build platform for easy object removal
  • On-board software enables stand-alone operation
  • Full color touch screen lets you go from file to building effortlessly
  • Seamless 3D printing with SD card
  • Fully enclosed for protected building
  • 100 micron build resolution for high quality building

General Information
  • Extruder: Single extrusion
  • Extruder Temperature: Up to 230‚°C /397‚°F
  • Operating Interface: 3.5 full color IPS touch screen
  • Maximum Build Volume: 9 x 5.9 x 5.5 / 230 mm x 150 mm x 140 mm
  • Layer Thickness: 4 mil | 0.004 inches 100 microns | 0.10 mm
  • SD Card: Up to 32GB in size /3D20 will not work with SD cards larger than 32GB
  • Internal Storage: 4GB

Weight (without spool)‚ 
  • 19 pounds 8 oz (8.845 kg)

Device Dimensions
  • Height: 15.7 inches (400 mm)
  • Width: 19.1 inches (485 mm)
  • Depth: 13.2 inches (335 mm)

Build Platform Dimensions
  • Height: 5.5 inches (139.7 mm)
  • Width: 9 inches (228.6 mm)
  • Depth: 13.2 inches (149.86 mm)

Filament
  • ONLY builds Dremel PLA filaments
  • Filament: 1.75mm PLA (Blodegradable/Renewable)

Storage
All polymers degrade with time. The following conditions ensure the material remains high quality:
  • Do not unpack until filament is needed
  • Store at room temperature: 16-29‚° C / 60 - 85‚° F
  • Store in a dry environment

Software
Dremel 3D20 comes with complimentary software. This application converts your 3D digital files into buildable model files. Dremel 3D20 is also compatible with Simplify3D; sold separately.
  • Windows Requirements: Dremel® Software runs on 32 and 64-bit Operating Systems Windows Vista or later
  • MAC OS X Requirements: Dremel® Software runs on Mac OS X 10.8 or later
  • Ubuntu Requirements: Dremel® Software runs on Ubuntu 14.04 or later

Hardware
A PC with the below minimum requirements will be required to run the Dremel® Software
  • Processor: Multi-core processor - 2 GHz or faster percore
  • System RAM: 2 GB
  • Screen Resolution: 1024x768
  • USB Port
  • Video Graphics Card to support OpenGL 2.1 or later

Electrical
  • 3D20 input rating: 120V, 60Hz, 1.2A

Environment
  • Room Temperature: 16-29‚° C (60 - 85‚° F)
  • Level workspace
  • Dry workspace environment

Warranty